New

Guaranteed 100% 4 band car gps tracker GT06 Google link GPS data high speed platform free shipping

Special Price $17.20

Regular Price: $18.92

In Stock

Quick Overview

GPS type : GPS Tracker

Brand Name : DYE GOO

Model Name : GT 06

 

GT06 is a Mini intelligent GPS Vehicle positioning terminal. It combines the GSM wireless communication technology and GPS positioning system technology, terminals using industrial-grade highly integrated design, intelligent power-saving and passive drift suppression, installation is simple, connect the power supply to start work immediately, wide inpute voltage range, wide applicable to all types of cars, motor cycles, electric cars, ships, etc., can provide all-weather, real-time vehicle positioning function, with global positioning service platform, you can achieve remote vehicle management.

 

 

 

Device feature

 

Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

Overview of the characteristics:

1.GPS position.

2.GSM 850/900/1800/1900MHZ.

3.With Shock sensor.

4.300Mah Battery inside, Power-Cut alarm.

5.Auto set APN.

6.Voltage 9-50V.

7.SOS alarm.

8.Voice Surveillance.

9.ACC detect. 

 

 

1. Specification

 

1).GSM:850/900/1800/1900MHZ

2).GPRS: Class12, TCP/IP

3).Working Voltage:9-50V DC

4).Working current:22mA (12VDC)

5).Working current:12mA (24VDC)

6).GPS locating time:

       Cold start:38s(Open sky)

       Warm start:32s

       Hot start:2s(Open sky)

7).GPS Precision:10m(2D RM)

8).Working temperature:-20 Celsius~+70 Celsius

9).Working humidity:20% ~80% RH

10).Measurement:98(L)×52(W)×16.5(H)mm

 

2.Accessories

 

Power wire

 

SOS wire

 

 Microphone

 

 

 Relay

 

 

3.Platform:

The platform free use for 1 year.

4.Wire defined

 

 

5.Device wiring

 

6. SMS Commands instruction

1)Administrator Number

Text command

Parameter

Sample

CENTER Add

710#number#

711#number#

710#13500135000#

711#13800138000#

CENTER Del

D01#

D02#

D01#

D02#

Command Description

1)Center number can control the oil and power and resume factory settings

2) Center number can receive the call and text of vibration alarm and over speeding alarm.

3) SIM must display the income call number to control oil and power.

4) Only one number can be center number.

5) Change center number must resend the command.

6)Add new center number by CETNER, A, and delete by CENTER, D

Command Feedback

Successful Setting:Add admin account 1 OK!

 

2) View Administrator Number

Text command

Parameter

Sample

View

901#

901#

Command Description

This directive is used to view Device Manager number.

 

Command Feedback

Successful Setting:Admin1:

                   Admin2:

    

 

3)Authorized Number Set

Text command

Parameter

Sample

Authorized Add

101# number #

102# number #

103# number #

 

1:101#13800138000#

2:102#12345678912#

3:103#12345678912#

 

Authorized Del

D11#

D12#

D13#

D11#

D12#

D13#

Command Description

1) Authorization number for SMS control oil.

2) only three numbers to set the authorization number

3) change the authorization number needs to delete the previous number

 

Command Feedback

Successful Setting:Add Authorization account 1 OK!

 

4) View Authorized Number

Text command

Parameter

Sample

View authorized

C10#

C10# 

Command Description

This directive is used to view the equipment authorization number

Command Feedback

Successful Setting:

Authorization 1:

Authorization 2:

Authorization 3:

 

5)APN Setting

Text command

Parameter

Sample

APN Setting

APN#username#password]

1:APN#intenet#123#123#

2: APN#internet#

Command Description

APN differs according to the local telecom operators.

For example:APN request password, please refer to Sample 1, and Sample 2 for no password.

Command Feedback

Successful Setting:SET APN OK!

 

6) Set / View Server

Text command

Parameter

Sample

SERVER Parameter

803#SERVER # port#

803#222.217.240.243#8011#

View SERVER

CIP#

1)CIP#

Command Description

Change the IP and port when move to a new server

port:10~65535

1 is domain and 0 is IP;

Command Feedback

Successful Setting:set IP OK!

 

7)Moving Time Interval

Text command

Parameter

Sample

TIMEER Parameter setting

730#uploading interval# 

730#20#

Command Description

Time scope:0, 10~60 seconds; 0, no data uploading;

10~60, means time interval;the default value is 15 seconds!

Command Feedback

Successful Setting:SET TIMER OK!

 

8)Static Time Interval

Text command

Parameter

Sample

STATIC

SUP# time interval#

SUP#5#

Command Description

Timescope:1~60 seconds;The device has

3D transmission and the default time interval are 5 minutes.

Command Feedback

Successful Setting:SET STATIC TIME OK!

 

9) Cancel the continuous upload 

Text command

Parameter

Sample

NUP

NUP#

NUP#

Command

Description

This command is used to cancel sending data to the platform

If need again to restore the upload , you need to send TIMEER Parameter setting.

Command Feedback

SET OK!

 

10)Power-Cut

Text command

Parameter

Sample

RELAYParameter1

222#

222#   cut off oil and power

RELAYParameter2

333#

333#  recover oil and power

 

Command Description

1)RELAY control the start and closeness of the relay

2) Only the center number can operate.

3)the device only cut off the oil circuit on the condition of the driving speed below 20KM/H or in static state.

4)When send the command, the device will reply “please waiting “When the vehicle speed is over 20KM/H, the device will cut off the oil or the power when the speed below 20KM/H.

 

Command Feedback

 

Successful Setting:Fuel cut has already been completed OK!

 

11)GMT

Text command

Parameter

Sample

GMT

801#location, time#

801#E8#

Command Description

The default time zone is Beijing time. If time zone need revised, please operate according to the above command.

Command Feedback

Successful Setting:Set time zone ok!

 

12)Vibration Sensitivity

Text command

Parameter

Sample

VIBRATION Parameter

123#2#, alarming way#

1) 123#2#3#

Set into vibration alarm time

V123#2#  

1) V123#2#

2) V123#1#

   Cancel vibration alarm

456#

456#

Command Description

the sensitivity  value of the vibration is from 1 to 5, 1is the most sensitive and o is close. Alarming ways: 1, calling 2, texting, 3 calling and texting.

Must set the center number and receiving number.

Command Feedback

set vibration alarm level, OK!

 

13)Speeding

Text command

Parameter

Sample

SPEEDING Parameter

SSA#120# alarming way#

1)SPEEDING, 120, 3#

2)SPEEDING, 120#

Command Description

The speed scope is form 60-220, if the speed is no this cope, the alarm is off.

Alarming :1, calling 2, texting, 3 calling and texting.

Must set the center number and receiving number.

Command Feedback

Successful Setting:set speeding alarm, OK!

 

14)Reset

Text command

Parameter

Sample

RESET

930#

930#

Command Description

Reset the device

Command Feedback

Successful Setting:Reset system, ok!

 

15)Factory

Text command

Parameter

Sample

Parameter

940#

940#

Command Description

Restore the factory setting

Only center number can initial this function

Factory setting will recover to the original setting

Command Feedback

Successful Setting:FACTORY OK!

 

16)Language Setting

Text command

Parameter

Sample

LANG Parameter

LANG1#

LANG0#

LANG1#  1:CHINESE,

LANG0#:ENGLISH

Command Description

;When check the location, it will reply the Chinese location in Chinese language setting; while reply the URL link when in English language setting.

Command Feedback

Successful Setting:SET LANG OK!

 

17)Position

Text command

Parameter

Sample

WHERE

988#

988#

Command Description

Check the longitude and altitude  and other information of the device

Command Feedback

Reply with longitude and altitude, speed and IMEL.

 

18)Google Link

Text command

Parameter

Sample

WHERE

666#

666#

Command Description

Check the location link of Google map

Command Feedback

<Datetime:12-07-05 13:21:30>

maps.google.com/maps?q=N22.540885, E113.95265

 

19)Version

Text command

Parameter

Sample

VERSION

V00#

V00#

Command Description

The command is to check the software version

Command Feedback

VERSION:Xxxx

BUILD:2012-07-05 10:12

 

20)Param Check

Text command

Parameter

Sample

PARAM

886#

886#

Command Description

The command is to check the settings and the default parameter.

Command Feedback

IMEI:351190012535936

APN : cmnet

IP:IP and port

TIMER: moving uploading interval

STATIC: static uploading interval

CENTER: center number

LANG: language(CN/EN)

GMT: time zone (E/W8)

 

21)Status Check

Text command

Parameter

Sample

STATUS

902#

902#

Command Description

The command is designed for checking the device’s working status.

Command Feedback

External power:ON/OFF  

GSM Signal:HIGH/MIDDLE/LOW   

GPS:FIXED/UNFIXED 

RELAYER:DISABLE/ENABLE      

Vibrate Warning:ON/OFF 

Pause:ON/OFF

 

22) Monitor (Voice Surveillance)

Text command

Parameter

Sample

SSS#

SSS#

SSS#

Command Description

Using Command Send this command to the tracker’s number, the tracker will call back to admin number.

Command Feedback